Combination Changing Instructions
Securam Lock Changing Instructions
CHANGE COMBINATION WITH SAFE DOOR OPEN
- Enter "0" six times. You will hear a sound to indicate the entry is valid and it is awaiting the code change.
- Enter the current six digit code, Two beeps will sound to indicate that it is valid
- Enter new six digit code one time, one beep will sound indicating the entry is valid
- Re-enter the new six digit code, one beeps will sound indicating the codes entered in steps 3 and 4 are the same and the code change process has been successful. If three beeps sound, the code change process has failed
- If code change is unsuccessful, the existing code will still be valid, go back and repeat steps 1-3
- Questions or problems call us 989-879-5477 or email: sales@ablesafe.com
S & G (Sargent and Greenleaf) Z02 Vintage
CHANGE COMBINATION WITH SAFE DOOR OPEN
- Enter 74*
- Then enter the current code followed by the "#" five beeps will sound to indicate entry
- Enter 1* (Number 1 is the main user)
- Enter new six digit code followed by the "#" three beeps will sound to indicate the change was successful
- Enter new six digit code followed by the "#" three beeps will sound
- If there are not three beeps the change is unsuccessful and the original code is still valid. Try original code make sure it works, then you can re-start the process
- If everything is successful , you can enter your new code followed by the "#"
- Test code several times with door open
- Questions or problems call us 989-879-5477 or email: sales@ablesafe.com
S & G (Sargent and Greenleaf)
CHANGE COMBINATION WITH SAFE DOOR OPEN
- Enter 22*
- Then enter the current code followed by the "#" five beeps will sound to indicate entry
- Enter new six digit code followed by the "#" three beeps with sound to indicate code is valid
- Enter new six digit code followed by the "#" three beeps will sound to indicate the change was successful
- If there are not three beeps the change is unsuccessful and the original code is still valid. Try original code make sure it works, then you can re-start the process
- If everything is successful , you can enter your new code followed by the "#"
- Questions or problems call us 989-879-5477 or email: sales@ablesafe.com
American Security ESL5
CHANGE COMBINATION WITH SAFE DOOR OPEN
- Press the "C" key,
- Press the " # " key, You should hear a short tone and see the keypad flash
- Key in the old combination " 1,2,3,4,5,6
- Press the " # " key you should hear a short tone
- Key in your new combination code
- Press the " # " key
- Re-Key in new combination
- Press the " # " key, If the combination input matches you should hear a a long combination tone indicating your new combination has been recorded
- Test your combination several times prior to closing and locking the safe
- Questions or problems call us 989-879-5477 or sales@ablesafe.com
Securam ProLogic
Securam ProLogic
Securam ProLogic
Mechanical Lock
Mechanical Lock
Mechanical Lock
Mechanical Lock
Mechanical Lock
Simplex Lock Changing Instructions
CHANGE COMBINATION WITH DOOR OPEN
Simplex Lock Changing Instructions:
Step 1: Enter Current combo
Step 2: Push Pin in on the back side of the lock. Should be on the left side.
Step 3: Release Pin on the side
Step 4: Clear combo by twisting Thumb Knob counter clockwise
Step 5: Enter new combo
Step 6: Twist Thumb Knob Clockwise as if to open the lock
Step 7: Reset Thumb Knob and test new combination before closing the lid
Questions or problems call us 989-879-5477 or sales@ablesafe.com
